S500-80
The UniRackTM offers the laboratory a support far more versatile and easy to use than any other rack available today. It is designed to use minimum counter space while offering maximum flexibility. Made of autoclavable polypropylene, it allows great resistance to various chemicals used in laboratories.
On one side it can hold up to 80 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x 75 mm or 12 x 75 mm sizes. This rack will accommodate all types of screw cap microtubes from 0.5 to 2 ml made by manufacturers such as Simport, Sarstedt, Nalgene, Bio-Plas, SSI, Sorenson etc… as well as 1 to 5 ml cryogenic vials. Flip the UniRackTM over and you can store up to 60 PCR or microcentrifuge tubes from 0.2 to 0.5 ml. Units can be firmly anchored laterally to one another, thanks to special anchor pins supplied with each rack. This innovative concept will allow the user to store 80, 160, 240 and even 320 tubes of different shapes, sizes and volumes since the units can be attached to each other either on the 80- or 60- position side facing upward, thus ensuring maximum versatility.
It is supplied with two removable handles allowing for better safety characteristics. The handles of the lower rack make a perfect fit with those of the upper one, ensuring a stable unit which can easily and safely be moved around. An additional protection level is possible by using a very resistant and quite affordable transparent lid allowing a clear view of the contents. More units can be added on top of each other with the lid in place thanks to small pins located on the cover. There is a frosted area on both sides for bar coding, labeling or writing, enabling the user to identify the contents. It is easy to write on it with a felt-tip pen. These areas are well labeled with arrows to clearly identify which side of the rack the information belongs to. Offered in a wide array of colors allowing the user to classify tubes by their content or by date, work shift, destination or simply by laboratory.
Dimensions: 223 x 67 x 27 mm H. (9 3/16 x 2 5/8 x 1 1/16 in. H.)
| Rack Cat. # | Color | Qty/Cs | Lid Cat. # | Color | Qty/Cs |
|---|---|---|---|---|---|
| S500-80B | Blue | Blue | S501-80 | Transparent | 10 |
| S500-80G | Green | Green | |||
| S500-80O | Orange | Pink | |||
| S500-80P | Pink | Yellow | |||
| S500-80R | Red | ||||
| S500-80Y | Yellow | ||||
| S500-80AS | Assorted* | ||||
| *Assorted colors : blue, green, orange, pink and yellow | |||||
The handles of the lower rack make a perfect fit with those of the upper one, ensuring a stable unit which can easily and safely be moved around.
Units can be firmly anchored laterally to one another, thanks to special anchor pins supplied with each rack.
A transparent lid can be placed on the UniRack™, allowing a clear view of the contents.
S600
A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available today, it offers all the advantages required by the modern laboratory. Made of highly resistant acetal polymer, it will not shatter or stain in contact with most laboratory chemicals. No coating to worry about, which can chip, peel or rust in a water bath.
The MultiRackTM is compact, lightweight and stackable in order to save as much space as possible. This is why it is ideal for incubators, refrigerators, freezers, under lab hoods and on bench tops. Not only is it submersible but will also sink and maintain stability without tipping over.
The MultiRackTM is made of three-tiers to facilitate the insertion and stability of tubes. The base tier has rounded wells with drain holes. Convenient handles on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect for accommodating up to 18 x 50 ml centrifuge tubes. Autoclavable at 121 °C for 20 minutes. Available in five attractive colors.
Dimensions: 293 x 115 x 65 mm H. (11 1/2 x 4 1/2 x 2 1/2 in. H.)
The MultiRackTM is available in 3 models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter.
| Cat. # | For tubes | Capacity | Color | Qty/Pk | Qty/Cs |
|---|---|---|---|---|---|
| S600-13B | up to 13 mm | 84 | Blue | 1 | 10 |
| S600-13G | up to 13 mm | 84 | Green | 1 | 10 |
| S600-13L | up to 13 mm | 84 | Lilac | 1 | 10 |
| S600-13O | up to 13 mm | 84 | Orange | 1 | 10 |
| S600-13Y | up to 13 mm | 84 | Yellow | 1 | 10 |
| Cat. # | For tubes | Capacity | Color | Qty/Pk | Qty/Cs |
|---|---|---|---|---|---|
| S600-16B | up to 16 mm | 60 | Blue | 1 | 10 |
| S600-16G | up to 16 mm | 60 | Green | 1 | 10 |
| S600-16L | up to 16 mm | 60 | Lilac | 1 | 10 |
| S600-16O | up to 16 mm | 60 | Orange | 1 | 10 |
| S600-16Y | up to 16 mm | 60 | Yellow | 1 | 10 |
| Cat. # | For tubes | Capacity | Color | Qty/Pk | Qty/Cs |
|---|---|---|---|---|---|
| S600-30B | 25 to 30 mm | 18 | Blue | 1 | 10 |
| S600-30G | 25 to 30 mm | 18 | Green | 1 | 10 |
| S600-30L | 25 to 30 mm | 18 | Lilac | 1 | 10 |
| S600-30O | 25 to 30 mm | 18 | Orange | 1 | 10 |
| S600-30Y | 25 to 30 mm | 18 | Yellow | 1 | 10 |